How does the cooling effect of the DualSun panel increase PV efficiency?
The photovoltaic power of solar panels decreases on average by 0.35% for each degree of increase in cell temperature. For example, a PV solar panel that has a power of 300W at 25°C, will have a power of 298.95W at 26°C and 297.9W at 27°C, ...
This is due to the fact that the operating voltage of the PV cells decreases significantly as the temperature rises.
One of the advantages of DualSun PV/T panels is that they absorb the wasted heat of the PV cells through the heat exchanger on the backside of the panel and in effect lower the temperature of the PV cells. This cooling effect allows to increase the PV power output and thus increase PV production by 5% to 15% as compared to a standard PV panel in the same conditions.
We have used a thermal camera to demonstrate the cooling effect on the temperature of the cells:
The circulation of water leads to cooling of the photovoltaic panels.
The 2 panels on the left in the picture above are standard photovoltaic panels.
The 6 panels on the right in the picture above are DualSun SPRING panels.
There is a difference of about 20°C between the photovoltaic and hybrid panels, i.e. a power gain of about 7%.
This homogenous fluid circulation in the exchanger leads to a cooling of the entire surface of the photovoltaic cells. The temperature gradient with good sunshine (800W/m²) is about 2°C per panel for a flow rate of 200L/h: it allows the heat to be evacuated efficiently.