Is it necessary to insulate DualSun hydraulic lines?

For applications where the temperature of the tank to be heated is higher than 30°C, the hydraulic transfer lines must be insulated. The insulation must be resistant to U.V. rays.

In the case of pre-insulated hydraulic lines, the insulation can be cut to facilitate the passage of partitions.

For all other applications hydraulic transfer lines do not require insulation.

DualQuickfit inter-panel connections are not insulated. We do not offer an insulating solution because the length and diameter of the connections are small. The exchange surface is therefore very limited and heat losses are negligible.

Also read: What type of pipes should be used between the panels and the technical room?