Is DualSun compatible with the Alliantz Balpac Pro thermodynamic water heater?

Yes.

The DualSun SPRING hybrid panels can be coupled with the Alliantz Balpac Pro thermodynamic storage tank.

In order to achieve greater economic efficiency through the production of free renewable heat, it is necessary to give priority to solar hot water production.

The intelligence of the thermodynamic storage tank can be informed by an electrical signal and the time programs can be set to guarantee hot water comfort and optimise the operating ranges of the DualSun solar system. This with the aim of maximising the energy yield of the DualSun-Alliantz coupling. 

In order to inform the intelligence of the thermodynamic storage tank so as to decide when to switch on the heat pump to guarantee optimum comfort at times of high demand, it is necessary to wire the DualSun solar controller to the electronic board of the thermodynamic storage tank.

 

1- Wiring

Wire terminals 8 and 10 of the DualSun SLL solar controller to terminals 5 and 6 of terminal block CN5 of the electronic board of the thermodynamic storage tank.

C_blage_ballon_Alliantz_Balpac_Pro.png

2- Setting of the DualSun SLL solar controller 

  1. Set up system 1
  2. Activate the parallel relay option : OPARR = ON
  3. Parallel relay : REL = R4
  4. Reference relay : RELR = R1
  5. INVER = OFF

 

3- Setting of the thermodynamic water heater

Example of schedule programming according to household profile, shower in the evening or morning. To be optimized according to the users' schedules.

  • Evening: HOn = 17h00 ; HOff = 23h00
  • Morning: HOn = 0h00 ; HOff = 6h00
Was this article helpful?
0 out of 0 found this helpful

Please sign in to leave a comment.